PI Hard with a Vengeance

A novice explores the Raspberry Pi.

Posts Tagged ‘wiringpi

Installing the Gertboard Software & ATmega328P

leave a comment »

First I would like to mention a site for anyone new to linux. http://cli.learncodethehardway.org/book/
 I consider myself a newbie although I ran a multi-line Dial-up BBS (1200Bps!) on DOS back in the late 80’s early 90’s and used a linux shell account to import Internet e-mail and Usenet newsgroups for my users.   Now that I am starting with the Pi,  I have to learn the basics all over again.  Anyhow this site is a really quick read, just over an hour and I think I am up to speed with the basic shell commands again.  Someone with no experience with CLI might take a bit longer, but it is a free site and very informative. I  Absolutely recommend it to the beginner. (I am now using the sister site for Python learnpythonthehardway.org/book/..looks like it will take a bit longer to complete, but just  as “easy going”!)

Now for what I have been doing the past few days with the Raspberry Pi.  I have fully installed the Gertboard and all of the related software.  It has taken a lot of research and hunting since the software and details of the complete setup are in several different sites.  I read and did ALL of the sample projects in the user manual. (Python Samples, not the “C”.  I also got both the RPi.GPIO and the WiringPi for Python versions working so I could try all the examples!)
Not knowing Unix very well, was quite a learning experience.  The hardest part was actually getting the ATmega up and running properly with the Arduino IDE. Not at all like installing an arduino ATMega (USB) or Read the rest of this entry »


Written by pihard

May 6, 2013 at 5:14 am

%d bloggers like this: